Hantek2000 series handheld oscilloscope combines oscilloscope, signal generator and multimeter in one. It is small and portable for single hand grip. With ultra-low power consumption design and Type-C charging interface, this meter can use for a whole day or standby for 2 months after 2 hours charging. Designed with full HD color LCD screen and concise keyboard, it is an ideal instrument for waveform display, signal generation and multimeter functions.
Features:
1. Oscilloscope + signal source + multimeter: One instrument for multiple purposes, with the functions of three universal test device.
2. Universal multimeter function: It can measure voltage, current, resistance, diode, capacitor and continuity test.
3. Signal generator function: It provides sine wave, square wave, triangle wave, trapezoidal wave and other waveform output, sine wave frequency can reach 25MHz.
4. AUTO one-button test function, easy and convenient.
5. Two groups of reference waveforms + 6 groups of saved waveforms can be called out for fast comparison.
6. With cursor measurement function, it supports manual measurement of time and voltage, accurately measuring waveforms.
7. The system comes with a calibration function, eliminating the issue of level drift.
8. Small volume, easy to grip by single hand, 45°Suspension bracket design, easily adapt various working environment.
9. Large-capacity lithium battery: 18650 replaceable lithium battery for long-term use
10. The meter is well protected by detachable shock casing with good impact resistance.
11. There is QR code on the back of the meter and you scan the code to watch online video help.
Specification:
Model: Hantek2D42
| Model |
Hantek2D72 |
Hantek2D42 |
| Oscilloscope |
| Bandwidth |
70MHz |
40MHz |
| Channel |
2CH Oscilloscope + multimeter + signal source |
| Horizontal |
| Sampling Rate |
250MSa/s(single channel), 125MSa/s(2 channel) |
| Waveform Interpolation |
(sin X)/X |
| Redording Length |
Max 6K(signle channel), 3K per channel(2 channel) |
| Scale Range |
5ns/div~500s/div 1, 2, 5 step |
| Vertical |
| Scale Range |
10mV/div~10V/div |
| Optional Analog Bandwidth Limit |
20MHz in input BNC |
| Low Frequency Response(-3dB) |
≤10Hz in BNC |
| Risetime in BNC |
≤5ns |
| Vertical Gain Accuracy |
±3% |
| Note: The bandwidth will be reduced to 6MHz when using X1 probe |
| Trigging |
| Type |
Edge trigging |
| Mode |
Auto, Normal, Single |
| Sloipe |
Rising edge, falling edge, rising/falling edge |
| Signal Source |
CH1/CH2 |
| Input |
| Input Impedance |
1MΩ±2% |
| DC Coupling |
25pF±3pF |
| Probe Attenuation |
1X, 10X |
| Supported Probe Attenuation |
1X, 10X, 100X, 1000X |
| Max Input Voltage |
150VRMS |
| Auto Measurement |
Frequency, peak-to-peak value |
| Signal Generator |
| Waveform Frequency |
Sine wave: 1Hz~25MHz
|
|
Square wave: 1Hz~10MHz
|
|
Triangle wave: 1Hz~1MHz
|
|
Trapezoidal wave: 1Hz~5MHz
|
| Sampling Rate |
250MSa/s |
| Amplitude |
2.5Vpp(50Ω), 5Vpp(high impedance) |
| Channel |
1 waveform output channel |
| Waveform Depth |
512Sa |
| Vertical Resolution |
12 bit |
| Output Impedance |
50Ω |
| Multimeter |
| Measurement Items |
Range |
Acuracy |
Resolution |
| DC Voltage |
400.0mV |
±(0.8%+5) |
100uV |
| 4.000V |
1mV |
| 40.00V |
10mV |
| 400.0V |
100mV |
| 600.0V |
±(1%+2) |
1V |
| AC Voltage |
4.000V |
±(1.2%+5) |
1mV |
| 40.00V |
10mV |
| 400.0V |
100mV |
| 600.0V |
±(1.5%+5) |
1V |
| DC Current |
40.00mA |
±(1%+2) |
10uA |
| 200.0mA |
±(1.5%+2) |
100uA |
| 4.000A |
±(1.8%+2) |
1mA |
| 10.00A |
±(3%+2) |
10mA |
| AC Current |
40.00mA |
±(1.3%+2) |
10uA |
| 400.0mA |
±(1.8%+2) |
100uA |
| 4.000A |
±(2%+3) |
1mA |
| 10.00A |
±(3%+5) |
10mA |
| Resistance |
400.0Ω |
±(1%+3) |
0.1Ω |
| 4.000kΩ |
±(1.2%+5) |
1Ω |
| 60.00kΩ |
10Ω |
| 400.0kΩ |
100Ω |
| 4.000MΩ |
1kΩ |
| 40.00MΩ |
±(1.5%+3) |
10kΩ |
| Capacitance |
40.00nF |
±(3%+5) |
10pF |
| 400.0nF |
100pF |
| 4.000uF |
1nF |
| 40.00uF |
10nF |
| 100.0uF |
100nF |
| Diode |
0-2.0V |
| Continuity Tesy |
<50Ω |
| General Parameters |
| Screen Resolution |
320*240 |
| Screen Contract |
Adjustable |
| Power Supply |
AC 100~240V, DC 5V/2A |
| Power Consumption |
<1.8W |
| Fuse |
T, 3A |
| Battery |
2*18650 2600mAh lithium battery |
| Oscilloscope Size |
20x9.8x4cm / 7.9x3.8x1.6in
|
| Bag Size |
23x17x8.5.cm / 9.0x6.7x3.3in
|
| Weight |
Approx. 1364g / 48.1oz |
Package list:
1 * Hantek2D42 Oscillpscope
2 * BNC to Crocodile Clip Cables
1 * USB Cable
1 * Power Adapter(US/EU plug)
2 * Test Probes
1 * High Voltage Probe
1 * Calibration Pen
2 * Protection Covers
8 * Identification Ring
1 * Bag
Ezonetronics RM - CT0008 7 inch 1 Din Re...
