—— Best Sellers ——
1 2 3
-
Ezonetronics RM - CT0008 7 inch 1 Din Re...$166.67
-
BOER High-end Ping Pong Racket Table Ten...
$14.45
-
SONOFF CD100S Door Window Sensor Wireles...
$3.55
-
BlackBerry KEY2 4G Smartphone Snapdragon...
$831.74
-
OUKITEL U16 Max 4G Phablet...
$160.97
- JOYO JT - 53 LED Digital Chromatic Tuner for Electronic Acoustic Guitar
- QS QS5013 2.5 Channel RC Helicopter with Gyroscope Infrared Function
- MPOW DS - D6 Waterproof Fitness Tracker Smart Bracelet Heart Rate Sleep Monitor for iOS Android System BLACK
- Rikomagic RKM MK22 TV Box Amlogic S912 Octa Core Android 6.0 2.4G + 5G Dual Band WiFi Bluetooth 4.0 3G DDR3 RAM 32G eMMC ROM
- AEC
- ALLDOCUBE
- EZCast
- Jumper
- Junsun
- Maxsun
- Mirascreen
- XDUOO
- OUKITEL
- View More Brands
Details
Main Features:
● Work with Anet A8 3D printer heat bed
● Completely solve the issue that the power of hot bed is too large and the load current
● Under the premise of normal cooling, it works stable under I ( max ) = 25A, the current must not exceed 25A in working process
● General add-on heated bed power expansion module
● Note: the wire's color is random
Summary:
● Remove basically all outside screws for your Anet A8 control box
● Take pictures of existing board wiring
● Unscrew two large 12 / 14GA wires on the board labeled HOT BED
● Screw these two wires into the new MOSFET board labeled HOT BED
● Connect the small jumper wires ( white ) to the control board where you just remove the two wires and screw them down. Note the polarity on each board. Match ( + ) to ( + ) and ( - ) to ( - )
● Find 2 x 6 - 8 inches pieces of 12 or 14 AWG wire
● Run one of the 6 inches wires to the power supply ( + ), screw in. The other side to the ( + ) DC on the new MOSFET board. Repeat for the negative wire ( - ) to ( - )
● Many people use velcro to secure the new board to the top of the control box.
● Put everything back together
● When complete, you'll see a blue light activate for signal from inside the box when the bed heater is activated by the control board
Suitable for: Mainboard Control
Type: DIY Accessories
Package weight: 0.087 kg
Product size: 6.00 x 5.00 x 3.00 cm / 2.36 x 1.97 x 1.18 inches
Product weight: 0.061 kg
