Features:
The hardware resolution is 480×320, support touch
Compatible and can be directly plugged into any version of Raspberry Pi
Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and mirror
Support FBCP software driver
As big as your Raspberry Pi (Raspberry Pi B+/2B/3B/3B+)
how to use:
Use in Raspbian/Ubuntu Mate/Kali/Retropie system
Install LCD driver
A. Install in Raspbian system (Raspberry Pi needs to be connected to the Internet)
(1) Log in to the Raspberry Pi terminal (or SSH remote login)
(2) Execute the following command to obtain the LCD driver and install it (after copying, click the right mouse button in the Putty window to paste):
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./MHS35-show
Check whether the driver is installed successfully
(1) After the LCD driver is installed, the system will automatically restart. After the startup is successful, the LCD can display and touch normally, indicating that the driver installation is successful
How to rotate the display direction
Note: This method is only for the display of the Raspberry Pi series, other displays are not applicable
The first step, if the driver has not been installed, please execute the following command (the Raspberry Pi needs to be connected to the Internet):
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./XXX-show
After the execution is completed, the driver will be installed, the system will automatically restart, and then the screen will display and touch normally
('XXX-show 'can be changed to the corresponding driver)
The second step, if the driver has been installed, please execute the following command:
cd LCD-show/
sudo ./rotate.sh 90
After the execution is completed, the system will automatically restart, and then the display can be rotated 90 degrees to display normally and touch
('90 'can also be changed to 0, 90, 180, 270 and other values, respectively representing the rotation angle of 0 degrees, 90 degrees, 180 degrees, 270 degrees)
If you are prompted that rotate.sh cannot be found, please go back to the first step and install the latest driver.
note:
The monitor needs to install the driver to display, otherwise it will be white.
Specifications:
Raspberry Pi 4 B's 3.5-inch display type
LCD type TFT transmissive
Interface SPI (32MHZ)
Support resolution 480 * 320
Backlight 6 white LED
Touch chip xpt2046
The package includes:
1 3.5 inch LCD touch screen
1 x ABS protective case for Raspberry pi 4 B
1 x stylus
Ezonetronics RM - CT0008 7 inch 1 Din Re...
