Remove parts
Remove the tape and battery from the camera before storing the camera after use. As long as the video tape is loaded into the camera, the tape will be led out by the camera's strap system, and the video recording part of the camera is in working condition. If the tape is not taken out before storage, after a long period of time, the tape that is pulled out will loosen and fall off the traction mechanism, which may cause the tie and cause mechanical failure the next time it is used. When storing video tapes, keep them away from heaters and other heat sources, not too close to strong magnetic fields, and store them upright in the original packaging box. If the battery is installed on the camera for a long time, it will consume power even if the power switch is turned off. Excessive battery discharge will affect its service life. If the battery is not used for a long time, charge and discharge it every six months.
Pay attention to moisture
Put the camera in a sealed plastic bag before entering the room, and take it out when the standby device is at the same temperature as the room. The head of the camera is a vulnerable part, and its life span is not only related to the material of the head and the quality of the tape used, but also closely related to the humidity of the air in the environment. The higher the air humidity, the faster the video head wears out. Generally, the life of the head is the longest when the relative humidity is 40%. Therefore, the humidity of the environment where the camera is used and stored is most suitable to be kept at about 40%. Remove from the camera. As long as the video tape is loaded into the camera, the tape will be led out by the camera's strap system, and the video recording part of the camera is in working condition. If the tape is not taken out before storage, after a long period of time, the tape that is pulled out will loosen and fall off the traction mechanism, which may cause the tie and cause mechanical failure the next time it is used. When storing video tapes, keep them away from heaters and other heat sources, not too close to strong magnetic fields, and store them upright in the original packaging box. If the battery is installed on the camera for a long time, it will consume power even if the power switch is turned off. Excessive battery discharge will affect its service life. If the battery is not used for a long time, charge and discharge it every six months.
Stay away from the magnetic field
Since the camera part uses the photoelectric conversion principle and the video part uses the electromagnetic conversion principle, the strong magnetic field and the strong electric field will affect the normal performance of its performance. In severe cases, it will cause image distortion and sound distortion. For this reason, the camera should be kept away from strong magnetic objects or objects capable of strong electromagnetic induction, such as televisions, speakers, induction cookers, transformers, etc., during work and storage.
